1. Jin, Q. and Li, V. C. (2019). “Structural and durability assessment of ECC/Concrete dual-layer system for tall wind turbine towers”, J. of Engineering Structures, 196, 109-115. Download PDF

  2. Jin, Q., Faraldos, M., Bahamonde, A., Zaribaf, B. H., and Kurtis, K. E. (2019). “Titania and Silica Nanoparticle-Modified Coatings for Cementitious Materials”, ACI SP: Nanotechnology for Improved Concrete Performance, 335, 97-111, Download PDF

  3. Jin, Q., Saad, E. M., Zhang, W., Tang, Y. and Kurtis, K. E. (2019). “Quantification of NOx Uptake in Plain and TiO2-doped Cementitious Materials”, Cement and Concrete Research, 122, 251-256. Download PDF

  4. Jin, Q. and Li, V. C. (2019). “Development of Lightweight Engineered Cementitious Composite for Durability Enhancement of Tall Concrete Wind Towers”, Cement and Concrete Composites, 96, 87-94. Download PDF

  5. Jin, Q., Leung, C. K.Y. and Yu, C. (2013). “Effect Joining Method for Pseudo-ductile Permanent Formwork” Materials and Structures, 46(3), 345-360. Download PDF

  6. Jin, Q. and Leung, C. (2011). “Fiber-reinforced cementitious composite (FRCC) plate for anchoring of FRP sheet on concrete member” J. Composites for Construction, 15(5), 790-798. Download PDF

Peer-Reviewed Journal Articles

- Raymond Chandler -

“A good story cannot be devised; it has to be distilled.”

PUBLICATIONS

  1. Jin, Q., VanderZwaag, M. B., Hordern, S. L., Tang, Y. and Kurtis, K. E. (2018). “Understanding of the Photocatalytic Products of NOx Degradation in TiO2-based Cementitious Materials”, Proceedings of the 6th International Symposium on Nanotechnology in Construction (NICOM6), Hong Kong​​

  2. Jin, Q. (2017). “Mathematical Modeling based on the Evolution of Concrete Deterioration for Optimizing Concrete Service Life and Repair Schedules”, Proceedings of the 3rd Corvallis Workshops on Service-life Prediction of Concrete, Edited by Jason H. Ideker and Karen L. Scrivener,  Corvallis, Oregon.

  3. Jin, Q. and Leung, C. K.Y. (2012). “The Use of FRCC and FRP for the Joining Method of Permanent Formwork”, Proceedings of third IIFC Asia-Pacific regional conference on the research and application of fiber reinforced polymers (FRP) in civil and architectural engineering structures, Edited by T. Ueda and T. Kanakubo, Hokkaido, Japan

  4. Jin, Q., Leung, C. K.Y. and Chung, W. (2011). “The Joining Method for Permanent Formwork”, Proceedings of International RILEM Conference on Advances in Construction Material through Science and Engineering, Edited by Christopher K.Y. Leung and K.T. Wan, Hong Kong

  5. Jin, Q. and Leung, C. K.Y. (2010). “Fiber-reinforced cementitious composite (FRCC) plate for the anchoring of FRP sheet on concrete member”, Proceedings of the Fifth International Conference on FRP Composites in Civil Engineering, Edited by L. Ye, P. Feng, and Q. Yue, Beijing, China

Technical Reports
  1. Jin, Q. and Li, V. C. (2016), “Program on Technology Innovation: Application of Advanced Concrete Technology in Tall Wind Towers” 3002007871, Electric Power Research Institute (EPRI), CA

Presentations
  1. Jin, Q., Perry, L., Bullard, J. W., and Kurtis, K. E. (2019). “Dissolution Kinetics of Calcium Salts under Different Environmental Conditions”, 10th Advances in Cement-Based Materials, Urbana, IL

  2. Jin, Q. (2018). “TiO2 Nanoparticles-Modified Coating on Concrete Infrastructure for Air-Purification and Self-Cleaning”, presented to ACI Georgia Chapter, Atlanta, GA, December 2018

  3. Jin, Q., VanderZwaag, M. B., Hordern, S. L., Tang, Y. and Kurtis, K. E. (2018). “Understanding of the
    Photocatalytic Products of NOx Degradation in TiO2-based Cementitious Materials”, 6th International Symposium
    on Nanotechnology in Construction (NICOM6), Hong Kong

  4. Jin, Q., Faraldos, M., Bahamonde, A., Balonis-Sant, M., Sant, G. and Kurtis, K. E. (2018). “Engineering Smart TiO2 Nanoparticle-Modified Coatings for Enhanced Corrosion Resistance”, ACI Convention, Las Vegas, NV

  5. Faraldos, M., Luna-Sanguino, G., Tolosana-Moranchel, A. Jin, Q., Kurtis, K. E. and Bahamonde, A. (2018). “NOx Photocatalytic Degradation and Self-cleaning of TiO2-GO Coated Cementitious Materials”, CICAT, 26th Catalysis Congress, Coimbra, Portugal

  6. Jin, Q., Tang Y. and Kurtis, K. E. (2018). “The Fundamental Understanding of NOx Sequestration of Photocatalytic Cementitious Materials”, 9th Advances in Cement-Based Materials, University Park, PA

  7. Bahamonde, A., Jiménez-Zorita, M., Jin, Q.,  Zaribaf, B. H., Kurtis, K. E., Faraldos, M. (2017), “Photo-Cements with Self-Cleaning Properties for NOx Abatement: Influence of Titania/Silica Coatings,” 5th European Conference on Environmental Applications of Advanced Oxidation Processes (EAAOP5), Prague, Czech Republic

  8. Jin, Q., Saad, E. M., Vanderzwaag, M. B., Reeve, T. L., Tang Y. and Kurtis, K.E. (2017). “Where does nitrogen go in photocatalytic cement?”, 8th Advances in Cement-Based Materials, Atlanta, Georgia

Conference Proceedings
  1. Jin, Q., Spevacek, C., El-Dehaibi, N.; and Johnson, W. (2016), “Uber and the Sharing Economy: Global Market Expansion and Reception.” WDI Publishing, University of Michigan; available online. Download PDF

Other Publications

© 2018 Bill Jin. All Rights Reserved

  • LinkedIn Social Icon
  • Facebook Social Icon